This 8 Port VGA Video Splitter offers outstanding quality and distance, allowing you to deliver high resolution VGA video from a single video source to up to 8 monitors simultaneously Max resolution up to 1920X1440 supporting a maximum VGA video bandwidth of up to 250MHz while delivering display resolutions up to 1920x 1440 Video In: HDDB 15 pin female, Video Out: HDDB 15 pin female Mirror Screen from 1 source upto 8 monitor
This digital to analog audio converter is designed for either household or professional audio switching Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously (not capable of being reversed) Available for connection to an external device such as an amplifier via standard RCA jacks or a headphone via 3.5mm jack cable(3.5mm jack cable not included) Supports uncompressed 2-channel LPCM digital audio signal output Supports sampling rate at32KHz, 44.1KHz, 48KHz and 96KHz
Send HDMI signal through One network cable or through TCP/IP network Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality The HDMI Extender over ONE CAT 5E/6 also support IR re-transmitting, so you can control the Source which is 120 meters outside using the HDMI Extender When transmitting a signal in 1080p resolution the CAT6 operating distance is 120 meters Connect the CAT6 in of the receiver with the CAT6 input of the HDMI over single CAT6 transmitter
VGA signal support resolution: 640 x480 60/72/75/85 hz, 800 x600 60/75 hz, 1024 x768 60/75 hz, 1280x1024 60 hz Support the following systems: NTSC (Taiwan, the United States, etc), NTSC - EIAJ (Japan), PAL (Europe, China), PAL - M (Brazil), PAL - N (Uruguay, Paraguay), and other countries television system Support full screen (OVERSCAN) and the full screen (UNDERSCAN) two display mode Converts VGA signal to BNC connection Plug and play, no driver needs
Support IR remote control, long distance controlled by keyboard and mouse. HDMI Over Lan KVM Switch Transmits max 120 meters from your HDMI source to HD display by single CAT5e/6 cable. At the same time, it's also convenient to transmit HDMI audio and video source by point-to-point mode, one point-to-many mode and cascade connection mode. Easy to install: Plug and play, No driver or software installation required. Direct transfer or through TCP/IP network hub / router
This HDM over coax supports No video loss no time delay 1080p,It can transmitter FULL HD 1080P HDMI signal up to 200M over Coaxial Cable works like a charm Small size easy to install and carry, made of high-duty aluminum alloy,extremely easy to heat dissipation,no worry to rust Engineering level 5-12V Wide range power supply,have many professional designs which suitable for various application scenario Extend FULL HD HDMI signal over 200 meters via signal RG59,RG6,RG7,RG11 coaxial cable Resolution Supported: [email protected] / [email protected] / [email protected] / [email protected] [email protected] / [email protected] [email protected]
The HDMI to AV signal Adapter can convert up to 1080p HDMI video digital signal and audio digital signal to AV (CVBS, standard-definition 480i, 576i,) composite video analog signal and the FL / FR stereo audio signals. Convert HDMI signal to Composite/Video + Audio R/L signal. Optional choice for output video systems: PAL/NTSC. Support PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N standard TV formats input. Connect HDMI laptop to analog TV, Projector for education, business presentation, commercial promotion, conference, exhibition, etc.
Supports HDMI resolution up to 4K x 2K One piece of CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission Transmission distance can be up to 160Ft (50 meters) Signaling rates up to 1.65Gbps in support of 1080P display With Built-in IR extender function
Supports HDMI Input and SDI output Converts HDMI signal to SDI Shows HDMI source on SDI display SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s, 1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s Supports HDMI input timings: [email protected], 576i, [email protected]/59.94/60, [email protected]/59.94/60, [email protected]/24/25/29.97/30/50/59.94/60
Each set includes one transmitter and one receiver. Use single UTP Cat5e/6 cable to substitute HDMI cable to achieve long distance transmission, the UTP Cable follows the standard of IEEE-568B. Transmission distance can be up to 200Ft (60 meters) for 1080p using CAT-6 Cable Supports 3D video format of 1080p, only 1 power adapter needs which included. IR control signal passing through function
This VGA to AV Audio converter is designed to convert a variety of computer images, from 640x480 up to 1920x1080, to interlaced NTSC or PAL video Support high resolution PC input up to SXGA([email protected]). Frequency Bandwidth 165MHz Power Supply USB power (Not included) Automatically detects and converts the incoming PC images to NTSC, PAL
Transmitting distance is up to 60 meters by Ethernet cable Use CAT-5e/ 6 replaces VGA wire Small, lightweight, no power and driver required, easy installation and flexible in wiring Widely used in KTV, large screen display and other venues that need to extend the VGA signal to 60 meters by Ethernet cable Support hard disk video recorder, monitor host and other equipment which has a VGA interface
It is used to convert VGA video and 3.5mm analog audio signal from your source to HDMI signal and display it on the large screen of the HDTV 1080p or 720p output selectable via switch; Plug and play Supports VGA input resolution (at 60Hz): 640x480, 800x600, 1024x768, 1280x720, 1600x1200, 1920x1080 pixels Enable HDTV to connect computer, notebook, DVD or other devices with VGA interface; No software driver needed Powered by USB (power adapter not included)
Support HDMI 1080p or 720p output. Provide advanced signal processing with great precision,colors, resolutions, and details.Plug and play Support PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N standard TV formats input Converts analog composite input to HDMI 1080p output HDTV / Moniter Attention: Please hook up the USB power cable (included) to 5V power source before use.
HDMI Extender is HDMI to RJ45 Extender Adapter works for HDTV, Set-top Boxes, DVD, HDPC, PS4, STB, HOME&Hotel Projector Data Monitoring Center, Large Conference Center. HDMI Network Extender Signaling rater up to 1.65Gbps,Perfect Output 1080P. HDMI to RJ45 Network cable extender converter Adapter can be up to 30 meters, Output 1080P Easy to install: Plug and play, No driver or software installation required. Auto adjustment of feedback, equalization, and amplification
Supported Resolutions: 480i up to 1080p; Comes as a pair (one sender, one receiver) Supports 1080p Resolution up to at least 100ft (30M) using CAT6 cable, and much further when using lower resolutions Please note that the device requires running dual RJ45 cables to establish the connection.One carries data signal and the other carries timing signals. The device is pretty simple to use. Just hook the two interface boxes with Cat 5 or Cat 6 cables, then run the HDMI into your monitor and computer. This extender will work with CAT5e cables, but we recommend using CAT6 cables if possible.
This device can extract the digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output AND SPDIF output at the same time The SPDIF output can support 5.1CH audio including Dolby Digitla 5.1CH and DTS 5.1CH it does NOT support Dolby Digital Plus and PCM 5.1CH and beyond
Auto detect resolution of HD-SDI, SD-SDI and 3G-SDI Full HDMI supported with embedded audio Synchronized output audio video and audio Plug and play SDI date rate: 270Mb/s, 1.485Gb/s, 2.97Gb/s
1X HDMI input and 2X HDMI output, can sync separation HDMI audio signal. Supports 1x SPDIF optical digital audio output, 2 channel RCA analog audio output Support HDMI input up to 1080P/60Hz, supports 3D (24/30fs) Support SPDIF digital audio format: Dolby digital (AC3), DTS, LPCM, and support 5.1CH Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV) LED indication: when source or sink is working, LED relative to is light
Extend VGA video and stereo audio signal max up to 300m over one UTP cat5e/6 cable Adjusting GAIN and PEAK to adapt for the different length of UTP cable Support resolution max up to 1920x1200 Dual output at local unit: 1 x VGA output for local site, plus 1 x UTP output for remote site Work with monitors projectors, HDTV, and flat panels with VGA connection
This Analog Audio to Digital Converter is designed for either home or professional audio switching It converts analog L/R audio to coaxial or toslink digital audio Converts analog L/R audio to coaxial or toslink digital audio signals Provides electromagnetic-noise-free transmission Easy to install and simple to operate
The RCA/ AV /VGA/ S-video to VGA video Converter features with Composite RCA/ AV/ VGA/ S-video input, VGA output It can work without PC/ Laptop, Video Signal transfer from Composite RCA/ AV / S-video to VGA, it can NOT be use reversely Product Type: VGA/S-video/Composite RCA/ AV to VGA Converter Switch Input Port: VGA, S-video(4 pin), Composite RCA/ AV Video Signal transfer from Composite RCA/ AV / S-video to VGA, it can NOT be use reversely
Easy to Use, installs in seconds, no settings and it is a resolution pass-through converter. Purely for conversion between video formats but not convert the input/output video resolutions. This converter box converts HDMI to Composite Video and stereo audio (R-L). It allows you to enjoy your high definition image & sound when watching movies or playing games on the older analog TVs or projectors that don't have a HDMI input. It offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Converts coaxial or toslink digital audio signals to analog L/R audio Available for connection to an external device such as an amplifier via standard RCA jacks Supports sampling rate at 32, 44.1, 48 and 96KHz 24-bit S/PDIF incoming bit stream on left and right channels Provides electromagnetic-noise-free transmission
Support HDMI1.3v & 1.2 signal (10.2Gbps/deep color 36bit/xv-YCC/1080p24fs/dts-HD) for upto 200ft transmit via CAT5E/6 LAN cable. 1080P/1080i/720P/576P/576i/480P/480i; Support 3D video Support up to 200ft between the TX and RX unit; For better picture quality and longer distance transfer, we recommend to use Cat 6 cable. Easy to install: Plug and play, No driver or software installation required. Auto adjustment of feedback, equalization, and amplification
Advanced scan frequency improves the technique, Refresh rate can be easily switched between 60-75Hz, while the pictures don't flick Resolving capability can be easily switched among(800*600/1024*768/1280*1024/1440*900/1680*1050/1920*1080/1920*1200) CRT MONITOR and LCD MONITOR are compatible The function of extra strong 3D image demonising makes the pictures clear and steady Distinguishing PIP function, and the size and position of the windows can be adjusted